Здравствуйте! Использую гуи сборку, в ней заменяю ядро скриптом, на ядро собранное в buldroot, с минимальной сборкой,для платы sodim-imx6. Установил из репозитория lm-sensors. А по результату запуска он мне пишет:
# sensors-detect revision 6284 (2015-05-31 14:00:33 +0200)
# DMI data unavailable, please consider installing dmidecode 2.7
# or later for better results.
# Kernel: 4.1.15 armv7l
# Processor: ARMv7 Processor rev 10 (v7l) (//)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): y
modprobe: FATAL: Module cpuid not found in directory /lib/modules/4.1.15
Failed to load module cpuid.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 16h thermal sensors... No
AMD Family 15h power sensors... No
AMD Family 16h power sensors... No
Intel digital thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
Intel 5500/5520/X58 thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Ну вобщем, остальное вроде детектирует, подскажите пожалуйста какой конкретно cpuid нужно ставить, из buildroot linux kernel?
04.03.2020 18:07
