Зашиваю BIN образ в SPI через программатор в связи с утерей заливочного образа. Неправльно монтируется NAND на части плат
Как можно исправить?
лог правильного монтирования(спойлеры скрытого текста несработали почемуто)
LLLCAug 19 201411:38:45
FRAC 0x92925552
memory type is DDR2
Wait for ddr ready 1power 0x00820710
1311 Frac 0x92925552
start change cpu freq
hbus 0x00000003
cpu 0x00010001
start test memory accress
ddr2 0x40000000
finish simple test
LLLLLLLFLCLLJ[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.10.20 (root@psm-st) (gcc version 4.9.3 (Buildroot 2015.08.1) ) #12 Thu Dec 22 14:20:36 MSK 2016
[ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Freescale MXS (Device Tree), model: Freescale i.MX28 Evaluation Kit
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: -e noinitrd console=ttyAMA0,115200 ubi.mtd=1 root=ubi0:rootfs0 rootfstype=ubifs rw gpmi
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 118536k/118536k available, 12536k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc04c1e4c (4840 kB)
[ 0.000000] .init : 0xc04c2000 - 0xc0597b34 ( 855 kB)
[ 0.000000] .data : 0xc0598000 - 0xc05d84e0 ( 258 kB)
[ 0.000000] .bss : 0xc05d84e0 - 0xc060ceb4 ( 211 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] of_irq_init: children remain, but no parents
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000575] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496)
[ 0.080230] pid_max: default: 32768 minimum: 301
[ 0.080533] Mount-cache hash table entries: 512
[ 0.081865] CPU: Testing write buffer coherency: ok
[ 0.082620] Setting up static identity map for 0xc03da9b0 - 0xc03da9ec
[ 0.085222] devtmpfs: initialized
[ 0.086963] pinctrl core: initialized pinctrl subsystem
[ 0.087676] regulator-dummy: no parameters
[ 0.088139] NET: Registered protocol family 16
[ 0.089611] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.118998] Serial: AMBA PL011 UART driver
[ 0.119556] 80074000.serial: ttyAMA0 at MMIO 0x80074000 (irq = 236) is a PL011 rev2
[ 0.356062] console [ttyAMA0] enabled
[ 0.377888] bio: create slab <bio-0> at 0
[ 0.386365] mxs-dma 80004000.dma-apbh: initialized
[ 0.394531] mxs-dma 80024000.dma-apbx: initialized
[ 0.400468] 3P3V: 3300 mV
[ 0.403840] usb0_vbus: 5000 mV
[ 0.407617] usb1_vbus: 5000 mV
[ 0.412155] SCSI subsystem initialized
[ 0.416622] usbcore: registered new interface driver usbfs
[ 0.422417] usbcore: registered new interface driver hub
[ 0.428123] usbcore: registered new device driver usb
[ 0.438732] pps_core: LinuxPPS API ver. 1 registered
[ 0.443824] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.453068] PTP clock support registered
[ 0.459649] ------------[ cut here ]------------
[ 0.464312] WARNING: at net/wireless/reg.c:434 0xc04dc3d4()
[ 0.469974] db.txt is empty, you should update it...
[ 0.474781] Modules linked in:
[ 0.478054] CPU: 0 PID: 1 Comm: swapper Not tainted 3.10.20 #12
[ 0.484030] Backtrace:
[ 0.486511] Function entered at [<c000bdf4>] from [<c000bff4>]
[ 0.492353] r6:c04dc3d4 r5:00000009 r4:c7837ea0 r3:00200040
[ 0.498115] Function entered at [<c000bfdc>] from [<c03d75c4>]
[ 0.503959] Function entered at [<c03d75a4>] from [<c00132c8>]
[ 0.509848] Function entered at [<c0013274>] from [<c001331c>]
[ 0.515693] r8:00000000 r7:c04e4638 r6:c7836020 r5:c05d847f r4:c060cd3c
r3:00000009
[ 0.523642] Function entered at [<c00132e4>] from [<c04dc3d4>]
[ 0.529481] r3:00000000 r2:c0494f99
[ 0.533136] Function entered at [<c04dc35c>] from [<c04dc2ec>]
[ 0.538976] r5:c060cd28 r4:00000000
[ 0.542624] Function entered at [<c04dc28c>] from [<c00087d8>]
[ 0.548467] r5:c05d84e0 r4:c04dc28c
[ 0.552067] Function entered at [<c0008738>] from [<c04c2b94>]
[ 0.557948] r8:c05d84e0 r7:c04e4638 r6:c04df508 r5:0000008b r4:00000004
[ 0.564713] Function entered at [<c04c2a94>] from [<c03d4a64>]
[ 0.570592] r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c03d4a54
r4:00000000
[ 0.578493] Function entered at [<c03d4a54>] from [<c00092f0>]
[ 0.584376] r4:00000000 r3:00000000
[ 0.588058] ---[ end trace 3bee4b52ce2c0b12 ]---
[ 0.593662] Switching to clocksource mxs_timer
[ 0.598403] cfg80211: Calling CRDA to update world regulatory domain
[ 0.632593] NET: Registered protocol family 2
[ 0.638461] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.645510] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.651995] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.658592] TCP: reno registered
[ 0.661875] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.667756] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.674722] NET: Registered protocol family 1
[ 0.680047] RPC: Registered named UNIX socket transport module.
[ 0.686006] RPC: Registered udp transport module.
[ 0.690825] RPC: Registered tcp transport module.
[ 0.695554] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.714767] Unpacking initramfs...
[ 0.718355] Initramfs unpacking failed: junk in compressed archive
[ 0.747321] Freeing initrd memory: 5120K (c0800000 - c0d00000)
[ 0.770105] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.778986] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.786678] msgmni has been set to 241
[ 0.796805] io scheduler noop registered (default)
[ 0.803225] of_dma_request_slave_channel: dma-names property missing or empty
[ 0.810524] uart-pl011 80074000.serial: no DMA platform data
[ 0.816940] 8006a000.serial: ttyAPP0 at MMIO 0x8006a000 (irq = 231) is a 8006a000.serial
[ 0.825837] mxs-auart 8006a000.serial: Found APPUART 3.1.0
[ 0.831914] 8006c000.serial: ttyAPP1 at MMIO 0x8006c000 (irq = 232) is a 8006c000.serial
[ 0.840815] mxs-auart 8006c000.serial: Found APPUART 3.1.0
[ 0.846808] 8006e000.serial: ttyAPP2 at MMIO 0x8006e000 (irq = 233) is a 8006e000.serial
[ 0.855608] mxs-auart 8006e000.serial: Found APPUART 3.1.0
[ 0.861688] 80070000.serial: ttyAPP3 at MMIO 0x80070000 (irq = 234) is a 80070000.serial
[ 0.870618] mxs-auart 80070000.serial: Found APPUART 3.1.0
[ 0.876609] 80072000.serial: ttyAPP4 at MMIO 0x80072000 (irq = 235) is a 80072000.serial
[ 0.885413] mxs-auart 80072000.serial: Found APPUART 3.1.0
[ 0.891694] at24 0-0050: 128 byte 24c01 EEPROM, writable, 32 bytes/write
[ 0.902277] ONFI param page 0 valid
[ 0.905804] ONFI flash detected
[ 0.909072] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron MT29F1G08ABAEAH4), 128MiB, page size: 2048, OOB size: 64
[ 0.920657] Scanning device for bad blocks
[ 1.119316] 2 ofpart partitions found on MTD device gpmi-nand
[ 1.125097] Creating 2 MTD partitions on "gpmi-nand":
[ 1.130268] 0x000000000000-0x000001400000 : "krnl"
[ 1.137357] 0x000001400000-0x000080000000 : "data"
[ 1.142302] mtd: partition "data" extends beyond the end of device "gpmi-nand" -- size truncated to 0x6c00000
[ 1.154800] gpmi-nand 8000c000.gpmi-nand: driver registered.
[ 1.180112] m25p80 spi32766.0: mx25l6405d (8192 Kbytes)
[ 1.185415] 4 ofpart partitions found on MTD device spi32766.0
[ 1.191371] Creating 4 MTD partitions on "spi32766.0":
[ 1.196555] 0x000000000000-0x000000240000 : "kernel"
[ 1.203766] 0x000000240000-0x0000007a0000 : "rootfs"
[ 1.211089] 0x0000007a0000-0x0000007f0000 : "opt"
[ 1.217990] 0x0000007f0000-0x000000800000 : "conf"
[ 1.334853] libphy: fec_enet_mii_bus: probed
[ 1.342891] PPP generic driver version 2.4.2
[ 1.347693] PPP BSD Compression module registered
[ 1.352538] PPP Deflate Compression module registered
[ 1.357646] PPP MPPE Compression module registered
[ 1.362778] usbcore: registered new interface driver ath9k_htc
[ 1.368982] usbcore: registered new interface driver rtl8192cu
[ 1.374849] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.381667] usbcore: registered new interface driver cdc_acm
[ 1.387349] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.395613] usbcore: registered new interface driver cdc_wdm
[ 1.401605] usbcore: registered new interface driver usb-storage
[ 1.408043] usbcore: registered new interface driver usbserial
[ 1.414143] usbcore: registered new interface driver usbserial_generic
[ 1.420923] usbserial: USB Serial support registered for generic
[ 1.427090] usbcore: registered new interface driver ftdi_sio
[ 1.433080] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 1.440638] usbcore: registered new interface driver option
[ 1.446363] usbserial: USB Serial support registered for GSM modem (1-port)
[ 1.453610] usbcore: registered new interface driver pl2303
[ 1.459438] usbserial: USB Serial support registered for pl2303
[ 1.466052] imx_usb 80080000.usb: pinctrl get/select failed, err=-19
[ 1.473659] ci_hdrc ci_hdrc.0: doesn't support gadget
[ 1.478896] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 1.483947] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[ 1.508429] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 1.515657] hub 1-0:1.0: USB hub found
[ 1.519615] hub 1-0:1.0: 1 port detected
[ 1.524391] imx_usb 80090000.usb: pinctrl get/select failed, err=-19
[ 1.532061] ci_hdrc ci_hdrc.1: doesn't support gadget
[ 1.537180] ci_hdrc ci_hdrc.1: EHCI Host Controller
[ 1.542333] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
[ 1.568427] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[ 1.575396] hub 2-0:1.0: USB hub found
[ 1.579350] hub 2-0:1.0: 1 port detected
[ 1.587965] stmp3xxx-rtc 80056000.rtc: rtc core: registered 80056000.rtc as rtc0
[ 1.596017] i2c /dev entries driver
[ 1.601089] stmp3xxx_rtc_wdt stmp3xxx_rtc_wdt: initialized watchdog with heartbeat 19s
[ 1.648386] mxs-mmc 80010000.ssp: initialized
[ 1.655757] usbcore: registered new interface driver usbhid
[ 1.661465] usbhid: USB HID core driver
[ 1.665800] mxs-lradc 80050000.lradc: Touchscreen not enabled.
[ 1.676432] TCP: westwood registered
[ 1.680186] TCP: veno registered
[ 1.683593] NET: Registered protocol family 17
[ 1.689727] registered taskstats version 1
[ 1.696508] UBI: attaching mtd1 to ubi0
[ 1.898418] usb 2-1: new high-speed USB device number 2 using ci_hdrc
[ 2.385920] UBI: scanning is finished
[ 2.390018] UBI error: ubi_read_volume_table: the layout volume was not found
[ 2.398528] UBI error: ubi_attach_mtd_dev: failed to attach mtd1, error -22
[ 2.405778] UBI error: ubi_init: cannot attach mtd1
[ 2.411025] stmp3xxx-rtc 80056000.rtc: setting system clock to 1970-01-01 00:00:07 UTC (7)
�[ 2.445123] Freeing unused kernel memory: 852K (c04c2000 - c0597000)
Detect board EM-IMX287
Check updates
Try found updates in:
/dev/mtdblock1
Try mount yaffs2 on /dev/mtdblock1 ...[ 2.589499] yaffs: dev is 32505857 name is "mtdblock1" rw
[ 2.596553] yaffs: passed flags ""
Mount yaffs2 on /dev/mtdblock1 successfully
Try mount jffs2 on /dev/mtdblock1 ...
[ 3.914439] jffs2: inconsistent device description
mount: mounting /dev/mtdblock1 on /mnt/sd failed: Invalid argument
Detect root dev: /dev/mtdblock3
Initializing random number generator... read-only file system detected...done
Starting network...
[ 5.195392] fec 800f0000.ethernet eth0: Freescale FEC PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=800f0000.etherne:00, irq=-1)
Move /opt to tmpfs...
Detect board: EM-IMX287
sh: kluge51: bad number
cat: can't open '/conf/gsmmux': No such file or directory
/opt/bin/start2.sh: line 28: can't open /dev/ttyS1: no such file
Start mount_nand.sh... /dev/mtd1
[ 6.812386] yaffs: dev is 32505857 name is "mtdblock1" rw
[ 6.817820] yaffs: passed flags ""
Start mount_sd2.sh...
/opt/bin/info-led.sh: cd: line 3: can't cd to /sys/class/leds/info-red/
Welcome to Buildroot
----------------------------------------------
неправильного монтирования
�HTLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLFLC
PowerPrep start initialize power...
Configured for 5v only power source. Battery powered operation disabled.
LLLCAug 19 201411:38:45
FRAC 0x92925552
memory type is DDR2
Wait for ddr ready 1power 0x00820710
1311 Frac 0x92925552
start change cpu freq
hbus 0x00000003
cpu 0x00010001
start test memory accress
ddr2 0x40000000
finish simple test
LLLLLLLFLCLLJ[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.10.20 (root@psm-st) (gcc version 4.9.3 (Buildroot 2015.08.1) ) #12 Thu Dec 22 14:20:36 MSK 2016
[ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Freescale MXS (Device Tree), model: Freescale i.MX28 Evaluation Kit
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: -e noinitrd console=ttyAMA0,115200 ubi.mtd=1 root=ubi0:rootfs0 rootfstype=ubifs rw gpmi
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 118536k/118536k available, 12536k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc04c1e4c (4840 kB)
[ 0.000000] .init : 0xc04c2000 - 0xc0597b34 ( 855 kB)
[ 0.000000] .data : 0xc0598000 - 0xc05d84e0 ( 258 kB)
[ 0.000000] .bss : 0xc05d84e0 - 0xc060ceb4 ( 211 kB)
[ 0.000000] SLUB: HWalign=32,[ 27.572630] option 1-1:1.1: GSM modem (1-port) converter detected
[ 27.590240] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 27.613332] option 1-1:1.2: GSM modem (1-port) converter detected
[ 27.629186] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[ 27.649876] option 1-1:1.3: GSM modem (1-port) converter detected
[ 27.668964] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB3
[ 27.686173] option 1-1:1.4: GSM modem (1-port) converter detected
[ 27.705786] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB4
connected to /dev/ttyUSB0
Escape character: Ctrl-\
Type the escape character to get to the prompt. Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] of_irq_init: children remain, but no parents
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000574] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496)
[ 0.080230] pid_max: default: 32768 minimum: 301
[ 0.080532] Mount-cache hash table entries: 512
[ 0.081862] CPU: Testing write buffer coherency: ok
[ 0.082617] Setting up static identity map for 0xc03da9b0 - 0xc03da9ec
[ 0.085221] devtmpfs: initialized
[ 0.086961] pinctrl core: initialized pinctrl subsystem
[ 0.087674] regulator-dummy: no parameters
[ 0.088138] NET: Registered protocol family 16
[ 0.089610] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.118987] Serial: AMBA PL011 UART driver
[ 0.119540] 80074000.serial: ttyAMA0 at MMIO 0x80074000 (irq = 236) is a PL011 rev2
[ 0.356052] console [ttyAMA0] enabled
[ 0.377914] bio: create slab <bio-0> at 0
[ 0.386386] mxs-dma 80004000.dma-apbh: initialized
[ 0.394550] mxs-dma 80024000.dma-apbx: initialized
[ 0.400487] 3P3V: 3300 mV
[ 0.403859] usb0_vbus: 5000 mV
[ 0.407636] usb1_vbus: 5000 mV
[ 0.412178] SCSI subsystem initialized
[ 0.416646] usbcore: registered new interface driver usbfs
[ 0.422442] usbcore: registered new interface driver hub
[ 0.428150] usbcore: registered new device driver usb
[ 0.438755] pps_core: LinuxPPS API ver. 1 registered
[ 0.443844] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.453087] PTP clock support registered
[ 0.459676] ------------[ cut here ]------------
[ 0.464339] WARNING: at net/wireless/reg.c:434 0xc04dc3d4()
[ 0.469999] db.txt is empty, you should update it...
[ 0.474807] Modules linked in:
[ 0.478081] CPU: 0 PID: 1 Comm: swapper Not tainted 3.10.20 #12
[ 0.484058] Backtrace:
[ 0.486540] Function entered at [<c000bdf4>] from [<c000bff4>]
[ 0.492381] r6:c04dc3d4 r5:00000009 r4:c7837ea0 r3:00200040
[ 0.498144] Function entered at [<c000bfdc>] from [<c03d75c4>]
[ 0.503989] Function entered at [<c03d75a4>] from [<c00132c8>]
[ 0.509877] Function entered at [<c0013274>] from [<c001331c>]
[ 0.515722] r8:00000000 r7:c04e4638 r6:c7836020 r5:c05d847f r4:c060cd3c
r3:00000009
[ 0.523670] Function entered at [<c00132e4>] from [<c04dc3d4>]
[ 0.529510] r3:00000000 r2:c0494f99
[ 0.533163] Function entered at [<c04dc35c>] from [<c04dc2ec>]
[ 0.539003] r5:c060cd28 r4:00000000
[ 0.542651] Function entered at [<c04dc28c>] from [<c00087d8>]
[ 0.548494] r5:c05d84e0 r4:c04dc28c
[ 0.552093] Function entered at [<c0008738>] from [<c04c2b94>]
[ 0.557974] r8:c05d84e0 r7:c04e4638 r6:c04df508 r5:0000008b r4:00000004
[ 0.564739] Function entered at [<c04c2a94>] from [<c03d4a64>]
[ 0.570618] r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c03d4a54
r4:00000000
[ 0.578520] Function entered at [<c03d4a54>] from [<c00092f0>]
[ 0.584403] r4:00000000 r3:00000000
[ 0.588086] ---[ end trace 15c179c85b3a5785 ]---
[ 0.593688] Switching to clocksource mxs_timer
[ 0.598428] cfg80211: Calling CRDA to update world regulatory domain
[ 0.632593] NET: Registered protocol family 2
[ 0.638442] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.645492] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.651976] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.658572] TCP: reno registered
[ 0.661854] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.667736] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.674698] NET: Registered protocol family 1
[ 0.680021] RPC: Registered named UNIX socket transport module.
[ 0.685978] RPC: Registered udp transport module.
[ 0.690798] RPC: Registered tcp transport module.
[ 0.695528] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.714801] Unpacking initramfs...
[ 0.718388] Initramfs unpacking failed: junk in compressed archive
[ 0.747356] Freeing initrd memory: 5120K (c0800000 - c0d00000)
[ 0.770131] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.779010] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.786703] msgmni has been set to 241
[ 0.796833] io scheduler noop re[ 27.572630] option 1-1:1.1: GSM modem (1-port) converter detected
[ 27.590240] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 27.613332] option 1-1:1.2: GSM modem (1-port) converter detected
[ 27.629186] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[ 27.649876] option 1-1:1.3: GSM modem (1-port) converter detected
[ 27.668964] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB3
[ 27.686173] option 1-1:1.4: GSM modem (1-port) converter detected
[ 27.705786] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB4
connected to /dev/ttyUSB0
Escape character: Ctrl-\
Type the escape character to get to the prompt.gistered (default)
[ 0.803256] of_dma_request_slave_channel: dma-names property missing or empty
[ 0.810554] uart-pl011 80074000.serial: no DMA platform data
[ 0.816970] 8006a000.serial: ttyAPP0 at MMIO 0x8006a000 (irq = 231) is a 8006a000.serial
[ 0.825867] mxs-auart 8006a000.serial: Found APPUART 3.1.0
[ 0.831949] 8006c000.serial: ttyAPP1 at MMIO 0x8006c000 (irq = 232) is a 8006c000.serial
[ 0.840850] mxs-auart 8006c000.serial: Found APPUART 3.1.0
[ 0.846846] 8006e000.serial: ttyAPP2 at MMIO 0x8006e000 (irq = 233) is a 8006e000.serial
[ 0.855647] mxs-auart 8006e000.serial: Found APPUART 3.1.0
[ 0.861732] 80070000.serial: ttyAPP3 at MMIO 0x80070000 (irq = 234) is a 80070000.serial
[ 0.870660] mxs-auart 80070000.serial: Found APPUART 3.1.0
[ 0.876649] 80072000.serial: ttyAPP4 at MMIO 0x80072000 (irq = 235) is a 80072000.serial
[ 0.885453] mxs-auart 80072000.serial: Found APPUART 3.1.0
[ 0.891733] at24 0-0050: 128 byte 24c01 EEPROM, writable, 32 bytes/write
[ 0.902324] ONFI param page 0 valid
[ 0.905853] ONFI flash detected
[ 0.909122] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron MT29F1G08ABAEAH4), 128MiB, page size: 2048, OOB size: 64
[ 0.920700] Scanning device for bad blocks
[ 1.119314] 2 ofpart partitions found on MTD device gpmi-nand
[ 1.125093] Creating 2 MTD partitions on "gpmi-nand":
[ 1.130265] 0x000000000000-0x000001400000 : "krnl"
[ 1.137339] 0x000001400000-0x000080000000 : "data"
[ 1.142282] mtd: partition "data" extends beyond the end of device "gpmi-nand" -- size truncated to 0x6c00000
[ 1.154775] gpmi-nand 8000c000.gpmi-nand: driver registered.
[ 1.180137] m25p80 spi32766.0: mx25l6405d (8192 Kbytes)
[ 1.185438] 4 ofpart partitions found on MTD device spi32766.0
[ 1.191392] Creating 4 MTD partitions on "spi32766.0":
[ 1.196572] 0x000000000000-0x000000240000 : "kernel"
[ 1.203765] 0x000000240000-0x0000007a0000 : "rootfs"
[ 1.211098] 0x0000007a0000-0x0000007f0000 : "opt"
[ 1.217997] 0x0000007f0000-0x000000800000 : "conf"
[ 1.334874] libphy: fec_enet_mii_bus: probed
[ 1.342918] PPP generic driver version 2.4.2
[ 1.347720] PPP BSD Compression module registered
[ 1.352564] PPP Deflate Compression module registered
[ 1.357672] PPP MPPE Compression module registered
[ 1.362806] usbcore: registered new interface driver ath9k_htc
[ 1.369005] usbcore: registered new interface driver rtl8192cu
[ 1.374872] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.381691] usbcore: registered new interface driver cdc_acm
[ 1.387374] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.395637] usbcore: registered new interface driver cdc_wdm
[ 1.401627] usbcore: registered new interface driver usb-storage
[ 1.408065] usbcore: registered new interface driver usbserial
[ 1.414166] usbcore: registered new interface driver usbserial_generic
[ 1.420946] usbserial: USB Serial support registered for generic
[ 1.427114] usbcore: registered new interface driver ftdi_sio
[ 1.433102] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 1.440660] usbcore: registered new interface driver option
[ 1.446384] usbserial: USB Serial support registered for GSM modem (1-port)
[ 1.453628] usbcore: registered new interface driver pl2303
[ 1.459456] usbserial: USB Serial support registered for pl2303
[ 1.466068] imx_usb 80080000.usb: pinctrl get/select failed, err=-19
[ 1.473680] ci_hdrc ci_hdrc.0: doesn't support gadget
[ 1.478918] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 1.483969] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[ 1.508454] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 1.515685] hub 1-0:1.0: USB hub found
[ 1.519643] hub 1-0:1.0: 1 port detected
[ 1.524419] imx_usb 80090000.usb: pinctrl get/select failed, err=-19
[ 1.532090] ci_hdrc ci_hdrc.1: doesn't support gadget
[ 1.537210] ci_hdrc ci_hdrc.1: EHCI Host Controller
[ 1.542361] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
[ 1.568456] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[ 1.575429] hub 2-0:1.0: USB hub found
[ 1.579384] hub 2-0:1.0: 1 port detected
[ 1.588022] stmp3xxx-rtc 80056000.rtc: rtc core: registered 80056000.rtc as rtc0
[ 1.596075] i2c /dev entries driver
[ 1.601150] stmp3xxx_rtc_wdt stmp3xxx_rtc_wdt: initialized watchdog with heartbeat 19s
[ 1.648412] mxs-mmc 80010000.ssp: initialized
[ 1.655780] usbcore: registered new interface driver usbhid
[ 1.661488] usbhid: USB HID core driver
[ 1.665822] mxs-lradc 80050000.lradc: Touchscreen not enabled.
[ 1.676450] TCP: westwood registered
[ 1.680201] TCP: veno registered
[ 1.683605] NET: Registered protocol family 17
[ 1.689736] registered taskstats version 1
[ 1.696516] UBI: attaching mtd1 to ubi0
[ 1.898433] usb 2-1: new high-speed USB device number 2 using ci_hdrc
[ 3.011577] UBI: scanning is finished
[ 3.037171] UBI: attached mtd1 (name "data", size 108 MiB) to ubi0
[ 3.043499] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 3.050382] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 3.057106] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 3.064055] UBI: good PEBs: 864, bad PEBs: 0, corrupted PEBs: 0
[ 3.070052] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 3.077207] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
[ 3.085542] UBI: available PEBs: 209, total reserved PEBs: 655, PEBs reserved for bad PEB handling: 20
[ 3.094959] UBI: background thread "ubi_bgt0d" started, PID 50
[ 3.101028] stmp3xxx-rtc 80056000.rtc: setting system clock to 1970-01-01 00:00:07 UTC (7)
�[ 3.118759] Freeing unused kernel memory: 852K (c04c2000 - c0597000)
Detect board EM-IMX287
Check updates
Try found updates in:
/dev/mtdblock1
Try mount yaffs2 on /dev/mtdblock1 ...[ 3.190248] yaffs: dev is 32505857 name is "mtdblock1" rw
[ 3.197312] yaffs: passed flags ""
Mount yaffs2 on /dev/mtdblock1 successfully
Try mount jffs2 on /dev/mtdblock1 ...
[ 4.430027] jffs2: inconsistent device description
mount: mounting /dev/mtdblock1 on /mnt/sd failed: Invalid argument
Detect root dev: /dev/mtdblock3
Initializing random number generator... read-only file system detected...done
Starting network...
[ 5.712205] fec 800f0000.ethernet eth0: Freescale FEC PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=800f0000.etherne:00, irq=-1)
Move /opt to tmpfs...
Detect board: EM-IMX287
sh: kluge51: bad number
cat: can't open '/conf/gsmmux': No such file or directory
/opt/bin/start2.sh: line 28: can't open /dev/ttyS1: no such file
Start mount_nand.sh... /dev/mtd1
[ 7.319095] yaffs: dev is 32505857 name is "mtdblock1" rw
[ 7.324530] yaffs: passed flags ""
Start mount_sd2.sh...
/opt/bin/info-led.sh: cd: line 3: can't cd to /sys/class/leds/info-red/
Welcome to Buildroot |
20.02.2025 20:21 
20.02.2025 20:37
