HTLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLFC
PowerPrep start initialize power...
Battery Voltage = 4.23V
5v source detected.Valid battery voltage detected.Booting from battery voltage source.
LLCJul 1 201017:35:57
EVK board
EMI_CTRL 0x1C084040
FRAC 0x92926152
init_ddr_mt46v32m16_133Mhz
power 0x00820710
Frac 0x92926152
start change cpu freq
hbus 0x00000003
cpu 0x00010002
LLLLLLLFCLFLJUncompressing Linux...................................................................................... done, booting the kernel.
[ 0.000000] Linux version 2.6.31-680-g9eb6b19-updater-00015-ga63ad47-dirty (b29397@shlinux1) (gcc version 4.1.2) #1 PREEMPT Thu Jul 1 17:21:44 CST 2010

[ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177

[ 0.000000] CPU: VIVT data cache, VIVT instruction cache

[ 0.000000] Machine: Freescale MX23EVK board

[ 0.000000] Memory policy: ECC disabled, Data cache writeback

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512

[ 0.000000] Kernel command line: console=ttyAM0,115200 rdinit=/linuxrc rw gpmi

[ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)

[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

[ 0.000000] Memory: 128MB = 128MB total

[ 0.000000] Memory: 122880KB available (2368K code, 271K data, 96K init, 0K highmem)

[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

[ 0.000000] NR_IRQS:224

[ 0.000000] Console: colour dummy device 80x30

[ 0.000000] console [ttyAM0] enabled

[ 0.010000] Calibrating delay loop... 115.91 BogoMIPS (lpj=579584)

[ 0.230000] Mount-cache hash table entries: 512

[ 0.230000] CPU: Testing write buffer coherency: ok

[ 0.250000] regulator: core version 0.5

[ 0.270000] regulator: vddd: 800 <--> 1575 mV fast normal

[ 0.270000] regulator: vddd_bo: 800 <--> 1575 mV fast normal

[ 0.280000] regulator: vdda: 1500 <--> 2275 mV fast normal

[ 0.280000] regulator: vddio: 2800 <--> 3575 mV fast normal

[ 0.290000] regulator: overall_current: 0 <--> 2147483 mA fast normal

[ 0.290000] regulator: mxs-duart-1: 0 <--> 2147483 mA fast normal

[ 0.300000] regulator: mxs-bl-1: 0 <--> 2147483 mA fast normal

[ 0.300000] regulator: mxs-i2c-1: 0 <--> 2147483 mA fast normal

[ 0.310000] regulator: mmc_ssp-1: 0 <--> 2147483 mA fast normal

[ 0.310000] regulator: mmc_ssp-2: 0 <--> 2147483 mA fast normal

[ 0.320000] regulator: charger-1: 0 <--> 2147483 mA fast normal

[ 0.320000] regulator: power-test-1: 0 <--> 2147483 mA fast normal

[ 0.330000] regulator: cpufreq-1: 0 <--> 2147483 mA fast normal

[ 0.340000] i.MX IRAM pool: 28 KB@0xc8808000

[ 0.370000] bio: create slab <bio-0> at 0

[ 0.380000] usbcore: registered new interface driver usbfs

[ 0.380000] usbcore: registered new interface driver hub

[ 0.390000] usbcore: registered new device driver usb

[ 0.410000] Trying to unpack rootfs image as initramfs...

[ 2.180000] Freeing initrd memory: 4096K

[ 2.190000] Bus freq driver module loaded

[ 2.190000] usb: DR gadget (utmi) registered

[ 2.210000] mxs_cpu_init: cpufreq init finished

[ 2.220000] JFFS2 version 2.2. (NAND) (SUMMARY) Вc 2001-2006 Red Hat, Inc.

[ 2.230000] msgmni has been set to 248

[ 2.250000] io scheduler noop registered

[ 2.250000] io scheduler anticipatory registered

[ 2.260000] io scheduler deadline registered

[ 2.260000] io scheduler cfq registered (default)

[ 3.660000] Console: switching to colour frame buffer device 60x34

[ 3.940000] mxs-duart.0: ttyAM0 at MMIO 0x80070000 (irq = 0) is a DebugUART

[ 3.950000] mxs-auart.1: ttySP1 at MMIO 0x8006c000 (irq = 24) is a mxs-auart.1

[ 3.960000] Found APPUART 3.0.0

[ 3.990000] brd: module loaded

[ 4.000000] i.MX GPMI NFC

[ 4.000000] NFC: Version 0, 4-chip GPMI and BCH

[ 4.000000] Boot ROM: Version 0, Single/dual-chip boot area, no block mark swapping

[ 4.010000] Scanning for NAND Flash chips...

[ 4.020000] NAND device: Manufacturer ID: 0x98, Chip ID: 0xd3 (Toshiba NAND 1GiB 3,3V 8-bit)

[ 4.030000] -----------------------------

[ 4.030000] NAND Flash Device Information

[ 4.030000] -----------------------------

[ 4.040000] Manufacturer : Toshiba (0x98)

[ 4.040000] Device Code : 0xd3

[ 4.050000] Cell Technology : MLC

[ 4.050000] Chip Size : 1 GiB

[ 4.050000] Pages per Block : 128

[ 4.060000] Page Geometry : 2048+64

[ 4.060000] ECC Strength : 4 bits

[ 4.060000] ECC Size : 512 B

[ 4.070000] Data Setup Time : 35 ns

[ 4.070000] Data Hold Time : 30 ns

[ 4.070000] Address Setup Time: 0 ns

[ 4.080000] GPMI Sample Delay : 6 ns

[ 4.080000] tREA : Unknown

[ 4.090000] tRLOH : Unknown

[ 4.090000] tRHOH : Unknown

[ 4.090000] Description : TH58NVG3D4xFT00

[ 4.100000] -----------------

[ 4.100000] Physical Geometry

[ 4.100000] -----------------

[ 4.110000] Chip Count : 1

[ 4.110000] Page Data Size in Bytes: 2048 (0x800)

[ 4.110000] Page OOB Size in Bytes : 64

[ 4.120000] Block Size in Bytes : 262144 (0x40000)

[ 4.120000] Block Size in Pages : 128 (0x80)

[ 4.130000] Chip Size in Bytes : 1073741824 (0x40000000)

[ 4.130000] Chip Size in Pages : 524288 (0x80000)

[ 4.140000] Chip Size in Blocks : 4096 (0x1000)

[ 4.140000] Medium Size in Bytes : 1073741824 (0x40000000)

[ 4.150000] ------------

[ 4.150000] NFC Geometry

[ 4.150000] ------------

[ 4.160000] ECC Algorithm : BCH

[ 4.160000] ECC Strength : 8

[ 4.160000] Page Size in Bytes : 2112

[ 4.170000] Metadata Size in Bytes : 10

[ 4.170000] ECC Chunk Size in Bytes: 512

[ 4.180000] ECC Chunk Count : 4

[ 4.180000] Payload Size in Bytes : 2048

[ 4.180000] Auxiliary Size in Bytes: 16

[ 4.190000] Auxiliary Status Offset: 12

[ 4.190000] Block Mark Byte Offset : 0

[ 4.190000] Block Mark Bit Offset : 0

[ 4.200000] -----------------

[ 4.200000] Boot ROM Geometry

[ 4.200000] -----------------

[ 4.210000] Boot Area Count : 1

[ 4.210000] Boot Area Size in Bytes : 41943040 (0x2800000)

[ 4.220000] Stride Size in Pages : 64

[ 4.220000] Search Area Stride Exponent: 2

[ 4.220000] Scanning for an NCB fingerprint...

[ 4.230000] Looking for a fingerprint in page 0x0

[ 4.230000] Found a fingerprint

[ 4.240000] Scanning device for bad blocks

[ 4.240000] Bad eraseblock 2 at 0x000000080000

[ 4.250000] Bad eraseblock 3 at 0x0000000c0000

[ 4.250000] Bad eraseblock 4 at 0x000000100000

[ 4.260000] Bad eraseblock 5 at 0x000000140000

[ 23.700000] Bad eraseblock 4054 at 0x00003f580000

[ 23.710000] Bad eraseblock 4055 at 0x00003f5c0000

[ 23.710000] Bad eraseblock 4056 at 0x00003f600000

[ 23.720000] Bad eraseblock 4057 at 0x00003f640000

[ 23.720000] Bad eraseblock 4058 a[ 23.980000] g_file_storage gadget: File-backed Storage Gadget, version: 20 November 2008

[ 23.990000] g_file_storage gadget: Number of LUNs=1

[ 24.100000] udc run

[ 24.100000] fsl-usb2-udc: bind to driver g_file_storage

[ 24.110000] MXS RTC driver v1.0 hardware v2.0.0

[ 24.110000] mxs-rtc mxs-rtc.0: rtc core: registered mxs-rtc as rtc0

[ 24.120000] mxs-mmc: MXS SSP Controller MMC Interface driver

[ 24.230000] mxs-mmc mxs-mmc.0: mmc0: MXS SSP MMC DMAIRQ 14 ERRIRQ 15

[ 24.240000] mxs-rtc mxs-rtc.0: setting system clock to 1970-01-01 00:03:18 UTC (198)

[ 24.240000] Freeing init memory: 96K


disable turn off display
uuc 0.4 [built Jul 1 2010 16:13:58]
UTP: Waiting for device to appear
utp_mk_devnode: creating node '/dev/utp' with 10+222
The watchdog is not configured, needed by mx35/mx51/mx53
658, No such device
[ 25.950000] g_file_storage gadget: full speed config #1

UTP: received command 'mknod class/mtd,mtd0,/dev/mtd0'
class = 'class/mtd'
item = 'mtd0'
node = /dev/mtd0
type = (null)
UTP: running utp_mk_devnode(class/mtd,mtd0,/dev/mtd0,0x2000)
utp_mk_devnode: creating node '/dev/mtd0' with 90+0
UTP: sending Success
UTP: received command 'mknod class/mtd,mtd1,/dev/mtd1'
class = 'class/mtd'
item = 'mtd1'
node = /dev/mtd1
type = (null)
UTP: running utp_mk_devnode(class/mtd,mtd1,/dev/mtd1,0x2000)
utp_mk_devnode: creating node '/dev/mtd1' with 90+2
UTP: sending Success
UTP: received command 'mknod class/misc,ubi_ctrl,/dev/ubi_ctrl'
class = 'class/misc'
item = 'ubi_ctrl'
node = /dev/ubi_ctrl
type = (null)
UTP: running utp_mk_devnode(class/misc,ubi_ctrl,/dev/ubi_ctrl,0x2000)
utp_mk_devnode: creating node '/dev/ubi_ctrl' with 10+63
UTP: sending Success
UTP: received command '$ flash_eraseall /dev/mtd0'
UTP: sending Busy
UTP: executing "flash_eraseall /dev/mtd0"

Erasing 256 Kibyte @ 0 -- 0 % complete.
Erasing 256 Kibyte @ 40000 -- 0 % complete.
Skipping bad block at 0x00080000

Skipping bad block at 0x000c0000

Skipping bad block at 0x00100000

Skipping bad block at 0x00140000

Skipping bad block at 0x00180000

Skipping bad block at 0x001c0000

Skipping bad block at 0x02740000

Skipping bad block at 0x02780000

Skipping bad block at 0x027c0000

Erasing 256 Kibyte @ 2800000 -- 100 % complete.
UTP: sending Success
UTP: received command '$ flash_eraseall /dev/mtd1'
UTP: sending Busy
UTP: executing "flash_eraseall /dev/mtd1"

Skipping bad block at 0x00000000

Skipping bad block at 0x00040000

Skipping bad block at 0x00080000

Skipping bad block at 0x3d740000

Skipping bad block at 0x3d780000

Skipping bad block at 0x3d7c0000

Erasing 256 Kibyte @ 3d800000 -- 100 % complete.
UTP: sending Success
UTP: received command 'send'
UTP: sending Success
[ 46.240000] g_file_storage gadget: full speed config #1

[ 47.260000] g_file_storage gadget: full speed config #1

[ 48.210000] g_file_storage gadget: full speed config #1

UTP: received command '$ kobs-ng init $FILE'
UTP: sending Busy
UTP: executing "kobs-ng init $FILE"
mtd: device 0 fails MEMERASE (0x2800000 - 0x0)
mtd: Failed to erase block @0x2800000
mtd: Failed to write BS#0
FAILED to commit structures
UTP: sending Non-success
[ 50.140000] utp_poll: exit with status 1280

failed to run command: type="push" body="$ kobs-ng init $FILE" file="" timeout="10" onError="" text="Flashing firmware" ,, Error code:1280

Thursday, December 29, 2011 07:58:35
1 - Panel A Start processing Singlechip NAND <LIST/>.

Panel A Start <CMD/> type="boot" body="Recovery" file="updater.sb" timeout="60" onError="" text="Booting update firmware.".

1 - Panel A Finished <CMD/> type="boot" body="Recovery" file="updater.sb" timeout="60" onError="" text="Booting update firmware." SUCCESS code=0.

Panel A Start <CMD/> type="find" body="Updater" file="" timeout="180" onError="" text="".

Panel A UtpUpdate Event: DeviceRemoval Msg: (null) DevState: Disconnected OpState: WAITING_FOR_DEVICE

*************Failed to add USB deivec :\\?\USB#Vid_066f&Pid_37ff#5&1d18ce8b&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}, try again.*************
Panel A UtpUpdate Event: VolumeArrival Msg: (null) DevState: Updater OpState: WAITING_FOR_DEVICE

Panel A Current Time: 2177170, Sleep 30 s to make sure MSC device is stable.

1 - Panel A Finished <CMD/> type="find" body="Updater" file="" timeout="180" onError="" text="" SUCCESS code=0.

Panel A Start <CMD/> type="push" body="mknod class/mtd,mtd0,/dev/mtd0" file="" timeout="10" onError="" text="".

1 - Panel A Finished <CMD/> type="push" body="mknod class/mtd,mtd0,/dev/mtd0" file="" timeout="10" onError="" text="" SUCCESS code=0.

Panel A Start <CMD/> type="push" body="mknod class/mtd,mtd1,/dev/mtd1" file="" timeout="10" onError="" text="".

1 - Panel A Finished <CMD/> type="push" body="mknod class/mtd,mtd1,/dev/mtd1" file="" timeout="10" onError="" text="" SUCCESS code=0.

Panel A Start <CMD/> type="push" body="mknod class/misc,ubi_ctrl,/dev/ubi_ctrl" file="" timeout="10" onError="" text="".

1 - Panel A Finished <CMD/> type="push" body="mknod class/misc,ubi_ctrl,/dev/ubi_ctrl" file="" timeout="10" onError="" text="" SUCCESS code=0.

Panel A Start <CMD/> type="push" body="$ flash_eraseall /dev/mtd0" file="" timeout="10" onError="" text="Erasing rootfs partition".

1 - Panel A Finished <CMD/> type="push" body="$ flash_eraseall /dev/mtd0" file="" timeout="10" onError="" text="Erasing rootfs partition" SUCCESS code=0.

Panel A Start <CMD/> type="push" body="$ flash_eraseall /dev/mtd1" file="" timeout="10" onError="" text="Erasing rootfs partition".

1 - Panel A Finished <CMD/> type="push" body="$ flash_eraseall /dev/mtd1" file="" timeout="10" onError="" text="Erasing rootfs partition" SUCCESS code=0.

Panel A Start <CMD/> type="push" body="send" file="files/imx23_linux.sb" timeout="10" onError="" text="Sending firmware".

1 - Panel A Finished <CMD/> type="push" body="send" file="files/imx23_linux.sb" timeout="10" onError="" text="Sending firmware" SUCCESS code=0.

Panel A Start <CMD/> type="push" body="$ kobs-ng init $FILE" file="" timeout="10" onError="" text="Flashing firmware".

1 - Panel A Finished <CMD/> type="push" body="$ kobs-ng init $FILE" file="" timeout="10" onError="" text="Flashing firmware" FAIL code=1280.

Panel A: failed to run command: type="push" body="$ kobs-ng init $FILE" file="" timeout="10" onError="" text="Flashing firmware" ,, Error code:1280

2 - Panel A Finished processing Singlechip NAND <LIST/> : FAIL code=1280.

Panel A: Operation stopped by user.,

Dec 30 200913:47:52
EMI_CTRL 0x1C084040
FRAC 0x92926152
init_ddr_mt46v32m16_133Mhz
power 0x00820710
Frac 0x92926152
start change cpu freq
hbus 0x00000003
cpu 0x00010002

hbus 0x00000003
cpu 0x00010002
LLLLLLLFCLFLJUncompressing Linux......