mmc0: host does not support reading read-only switch. Assuming write-enable.
mmc0: new SD card at address 1234
mmcblk0: mmc0:1234 SA02G 1921024KiB
mmcblk0:<7>mmc0: starting CMD18 arg 00000000 flags 000000b5
p1
eth0: link up (100/Full)
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
mount: Mounting /dev/sda1 on /mnt/usb failed: No such device o
Please press Enter to activate this console. mmc0: host does not support reading read-only switch. Assuming write-enable.
mmc0: new SD card at address 1234
mmcblk0: mmc0:1234 SA02G 1921024KiB
mmcblk0:<7>mmc0: starting CMD18

[@SK-AT91SAM9 /]$mount /dev/mmc1 /mnt/mmc/
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[@SK-AT91SAM9 /]$ls /mnt/mmc/
bin etc linuxrc proc tmp
boot home lost+found root usr
config init mnt sbin var
dev lib opt sys

udc: at91_udc version 3 May 2006
mice: PS/2 mouse device common for all mice
rtc-at91sam9 at91_rtt.0: rtc core: registered at91_rtt as rtc0
IRQ 1/rtc0: IRQF_DISABLED is not guaranteed on shared IRQs
rtc-at91sam9 at91_rtt.0: rtc0: SET TIME!
i2c /dev entries driver
i2c-gpio i2c-gpio: using pins 55 (SDA) and 56 (SCL)
TCP cubic registered
NET: Registered protocol family 17
rtc-at91sam9 at91_rtt.0: hctosys: unable to read the hardware clock
Waiting for root device /dev/mmcblk0p1...
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new SD card at address 1234
mmcblk0: mmc0:1234 SA02G 1.83 GiB
mmcblk0: p1
EXT2-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem) on device 179:1.
Freeing init memory: 116K
Kernel panic - not syncing: Attempted to kill init!
Backtrace:
[<c0029490>] (dump_backtrace+0x0/0x10c) from [<c01d8808>] (dump_stack+0x18/0x1c)
r7:c3815c40 r6:c3815c40 r5:00000010 r4:00000004
[<c01d87f0>] (dump_stack+0x0/0x1c) from [<c01d8848>] (panic+0x3c/0x130)
[<c01d880c>] (panic+0x0/0x130) from [<c003fcfc>] (do_exit+0x6c/0x5c8)
r3:c0261494 r2:60000093 r1:c381bd20 r0:c022a03c
[<c003fc90>] (do_exit+0x0/0x5c8) from [<c00402e8>] (do_group_exit+0x90/0xc4)
[<c0040258>] (do_group_exit+0x0/0xc4) from [<c004a9b8>] (get_signal_to_deliver+0x2e8/0x324)
r4:00000004
[<c004a6d0>] (get_signal_to_deliver+0x0/0x324) from [<c0028114>] (do_notify_resume+0x60/0x5a8)
[<c00280b4>] (do_notify_resume+0x0/0x5a8) from [<c0025f08>] (work_pending+0x1c/0x20)